IFP OIL TOLERANT PRIMER is a two-component epoxy resin membrane
that is tolerant of residual oil contamination in concrete
floors. However, it is essential that all surface contamination
is removed by cleaning with an industrial detergent.
IFP OIL TOLERANT PRIMERwill not bond to grossly contaminated surfaces
where sufficient cleaning and preparation has not been
carried out.
IFP OIL TOLERANT PRIMER is designed as a pre-primer to improve
the adhesion of subsequent primers, coatings and
screed systems to substrates that have previously been
contaminated with oils, and have been thoroughly cleaned
but may still retain some residual contamination.
Product Advantages
Low viscosity
Excellent adhesion to concrete Easily applied
Good Chemical Resistance
Typical Areas of Usage
As a primer for concrete and sand/cement screeds with
low levels of residual contamination, prior to application of
Epoxy Resin and Polyurethane seamless resin
floor systems.
Technical data after 28 Days at 20°C
Compressive Strength N/A
Shore D Hardness N/A
Bond Strength > 3.3 N/mm2
(Concrete Failure)
Abrasion Resistance N/A
Slip Resistance
Pendulum Test to
BS7976-2N/A
VOC <200g/l
Chemical Resistance N/A
IFP OT PRIMER 10KG
also available in 25kg
The colour is Grey RAL7042 - Available in other colours on request.
